tc in CentOS
Introduction
Installation
yum install -y tc
Example
Let us ping the site topbicycle.ru
ping www.topbicycle.ru
PING www.topbicycle.ru (87.236.16.208) 56(84) bytes of data. 64 bytes from ssl.kirk.beget.com (87.236.16.208): icmp_seq=1 ttl=63 time=29.8 ms 64 bytes from ssl.kirk.beget.com (87.236.16.208): icmp_seq=2 ttl=63 time=35.3 ms 64 bytes from ssl.kirk.beget.com (87.236.16.208): icmp_seq=3 ttl=63 time=33.3 ms 64 bytes from ssl.kirk.beget.com (87.236.16.208): icmp_seq=4 ttl=63 time=41.0 ms
The ping comes back roughly every 30 ms
You need to find out which network interface carries the connection to the external internet.
You can do this with
iftop
or
nethogs
In this example the required interface is enp0s3
tc -s qdisc ls dev enp0s3
qdisc pfifo_fast 0: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 278060 bytes 3193 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0
Let us set a delay of 100 ms
tc qdisc add dev enp0s3 root netem delay 100ms
Now, if you run ping, the requests will go 100 ms slower
ping www.topbicycle.ru
PING www.topbicycle.ru (87.236.16.208) 56(84) bytes of data. 64 bytes from ssl.kirk.beget.com (87.236.16.208): icmp_seq=1 ttl=63 time=130 ms 64 bytes from ssl.kirk.beget.com (87.236.16.208): icmp_seq=2 ttl=63 time=129 ms 64 bytes from ssl.kirk.beget.com (87.236.16.208): icmp_seq=3 ttl=63 time=127 ms 64 bytes from ssl.kirk.beget.com (87.236.16.208): icmp_seq=4 ttl=63 time=126 ms
Delete the rule
To remove the limit from the previous example you need to run
sudo tc qdisc del dev enp0s3 root
Inspect the existing rules
Run
tc qdisc show
qdisc noqueue 0: dev lo root refcnt 2 qdisc cbq 1: dev enp0s3 root refcnt 2 rate 100Mbit (bounded,isolated) prio no-transmit qdisc pfifo_fast 0: dev enp0s8 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: dev enp0s9 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: dev enp0s10 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc noqueue 0: dev virbr0 root refcnt 2 qdisc pfifo_fast 0: dev virbr0-nic root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Limit the connection speed
Run
#!/bin/bash TC=/usr/sbin/tc DEV=enp0s8 LIMIT=3mbit DST_CIDR=192.168.56.109/24 U32="$TC filter add dev $DEV protocol ip parent 1:0 prio 1 u32" create () { echo "== SHAPING INIT ==" $TC qdisc add dev $DEV root handle 1:0 htb \ default 30 $TC class add dev $DEV parent 1:0 classid \ 1:1 htb rate $LIMIT $U32 match ip dst $DST_CIDR flowid 1:1 echo "== SHAPING CONFIG DONE ==" } clean () { echo "== CLEANUP INIT ==" $TC qdisc del dev $DEV root echo "== CLEANUP DONE ==" } clean create
Article author: Andrei Olegovich