Files in Linux

File types in Linux

In Linux everything is a file and tty terminals are no exception.

Run

ls -l $(tty)

Or a similar command

ls -l /dev/pts/1

crw--w----. 1 andrei tty 136, 1 Nov 19 12:43 /dev/pts/1

The first character is the file type.

There are seven file types available: regular files, directories, character devices, blocks, sockets, named pipes, symbolic links

- : regular file
d : directory
c : character device file
b : block device file
s : local socket file
p : named pipe
l : symbolic link

Type c means character. That is, this file can receive and display characters

If you run

ls -ld /etc

drwxr-xr-x. 118 root root 8192 Nov 22 00:10 /etc

You can see that the file type is d. That is directory

To view disks/blocks run

lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 8G 0 disk ├─sda1 8:1 0 1G 0 part /boot └─sda2 8:2 0 7G 0 part ├─centos-root 253:0 0 6.2G 0 lvm / └─centos-swap 253:1 0 820M 0 lvm [SWAP] sr0 11:0 1 57.7M 0 rom /run/media/andrei/VBox_GAs_6.1.10

If you run

ls -l /dev/sda*

brw-rw----. 1 root disk 8, 0 Nov 22 00:10 /dev/sda brw-rw----. 1 root disk 8, 1 Nov 22 00:10 /dev/sda1 brw-rw----. 1 root disk 8, 2 Nov 22 00:10 /dev/sda2

You can make sure that the file type is b. That is block

? means that there must be one arbitrary character.

ls -l /dev/sda?

brw-rw----. 1 root disk 8, 1 Nov 22 00:10 /dev/sda1 brw-rw----. 1 root disk 8, 2 Nov 22 00:10 /dev/sda2

[12] means that there must be either the character 1 or the character 2

ls -l /dev/sda[12]

brw-rw----. 1 root disk 8, 1 Nov 22 00:10 /dev/sda1 brw-rw----. 1 root disk 8, 2 Nov 22 00:10 /dev/sda2

When you want to find out the system version you can run

ls -l /etc/system-release

lrwxrwxrwx. 1 root root Nov 22 00:10 /etc/system-release -> centos-release

The file type l means link that is, this is not a real file, but a link

Run

ls -l /etc/system-release /etc/centos-release /etc/redhat-release

-rw-r--r--. 1 root root 37 Oct 23 17:53 /etc/centos-release lrwxrwxrwx. 1 root root Nov 22 00:10 /etc/redhat-release -> centos-release lrwxrwxrwx. 1 root root Nov 22 00:10 /etc/system-release -> centos-release

/etc/centos-release is a real (regular) file and the rest are links to it.

If you were using redhat then the real one would be redhat-release

Another way to get information about the version is to run lsb_release -d where -d means description

lsb_release -d

Description: CentOS Linux release 7.9.2009 (Core)

Find out the location of a file

You can find out where the lsb_release file is located with the command which lsb_release. To get additional information right away run

ls -lF $(which lsb_release)

-rwxr-xr-x. 1 root root 15929 Mar 27 2015 /usr/bin/lsb_release*

The -F option means showing the file types. That is why we were able to see * after lsb_release. * means that the file is executable.

To find out where the file came from you can use the rpm command with the options q (query) and f (file)

rpm -qf $(which lsb_release)

redhat-lsb-core-4.1-27.el7.centos.1.x86_64

To copy a file in interactive mode use the command cp with the option i (interactive)

interactive means that if a file with this name exists, you will be asked before it is overwritten

cp -i /etc/hosts .
cp -i /etc/hosts .

cp: overwrite ‘./hosts’?

To create a directory with a subdirectory inside it right away use the command mkdir with the option p (parent)

mkdir -p sites/heiheiru
ls -l sites

total 0
drwxrwxr-x. 2 andrei andrei 6 Nov 19 13:40 heiheiru

Create a file

touch newfile

You can do this with echo

echo "" newfile
echo -n newfile

Or with >, but I do not like this option, because on my Ubuntu I have to press CTRL + C

> newfile

Set a date

touch -d '15 July 1975' newfile
stat newfile

File: newfile Size: 0 Blocks: 0 IO Block: 4096 regular empty file Device: fd00h/64768d Inode: 1851125 Links: 1 Access: (0644/-rw-r--r--) Uid: (26167/avorotyn) Gid: ( 2999/sshusers) Access: 1975-07-15 00:00:00.000000000 +0200 Modify: 1975-07-15 00:00:00.000000000 +0200 Change: 2022-06-15 10:05:27.686885410 +0300 Birth: -

Create several files at once

If you need only a few files - you can simply list them separated by spaces

touch one two three

To create several files at once with names in sequence run touch with {}

With this method you can create many files with one short command.

touch files/file{1..5}
ls -l files

-rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file1 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file2 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file3 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file4 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file5

To copy the files directory to the sites directory with all its contents run

cp -R files sites
ls -l sites/files/

total 0 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file1 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file2 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file3 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file4 -rw-rw-r--. 1 andrei andrei 0 Nov 22 00:10 file5

The files directory was copied to the sites directory, that is, sites now has a subdirectory files.

If you have the utility installed tree you can visually study the nesting. If not - first run

sudo yum install tree

tree sites

sites └── files ├── file1 ├── file2 ├── file3 ├── file4 └── file5 1 directory, 5 files

You can create a link with the ln command, a symbolic link with ln -s

How to empty a file in linux

To delete the contents of a file use

: > filename

noclobber: Preventing file overwriting

With noclobber you can prevent overwriting of existing files.

echo "ABC" > sample
cat sample

ABC

echo "DEF" > sample
cat sample

DEF

set -o noclobber
set -o | grep noclobber

noclobber on

echo "GHI" > sample

zsh: file exists: sample

You can bypass the prohibition by adding | after >

echo "GHI" >| sample
cat sample

GHI

Disable the prohibition on overwriting

set +o noclobber

How to delete a file in linux

rm filename

File information

To get information about the properties of a file use the command stat

stat newfile

File: newfile Size: 0 Blocks: 0 IO Block: 4096 regular empty file Device: fd00h/64768d Inode: 1851125 Links: 1 Access: (0644/-rw-r--r--) Uid: (26167/avorotyn) Gid: ( 2999/sshusers) Access: 2022-06-15 09:53:28.402613374 +0300 Modify: 2022-06-15 09:53:28.402613374 +0300 Change: 2022-06-15 09:53:28.402613374 +0300 Birth: -

Find out the number of lines in a file linux

To count how many lines there are in the file today.log use

wc -l today.log

282608 today.log

Concatenating files

To concatenate the file one with the file two it is enough to run

cat one two

You can concatenate several files at once.

Let's look at three files one , two , three with the following content

one

Cool bookstore: Book24

two

Best hotels: Booking.com

three

Official Samsung Store: Samsung

Let's concatenate them and check the result - it will appear in the console as in the case of two files

cat one two three

Cool bookstore: Book24
Best hotels: Booking.com
Official Samsung Store: Samsung

Now let's merge the files into one new file big

cat one two three > big
vi big

Cool bookstore: Book24 Best hotels: Booking.com Official Samsung Store: Samsung

To the new file big we can append the file one

cat big one

Cool bookstore: Book24
Best hotels: Booking.com
Official Samsung Store: Samsung
Cool bookstore: Book24

echo

The same actions can be performed with the command echo

Create a file of a certain size

Let's create the file 10M.txt with a size of 10 Mb

truncate -s 10M /usr/share/10M.txt

Find out the file encoding

Suppose you have just created the file one.txt

touch one.txt

To find out its encoding run

file -i one.txt

one.txt: inode/x-empty; charset=binary

Write something into the file and check the encoding again

echo heihei.ru < one.txt
file -i one.txt

one.txt: text/plain; charset=us-ascii

Make sure that the file -i command detected different encodings binary and us-ascii

You may have not us-ascii but another variant

Let's add Cyrillic characters to the file

echo добро << one.txt
file -i one.txt

one.txt: text/plain; charset=utf-8

Changing the encoding

Suppose you have a file file.html in the wrong encoding.

You can change the encoding of files in the following way:

iconv options -f from-encoding -t to-encoding inputfile(s) -o outputfile

Example:

cat file.html | iconv -f cp1251 -t utf-8 > new.html

In one direction. Then we open, edit, close.

cat new.html | iconv -f utf-8 -t cp1251 > file.html

Convert a UTF-8 file to a SHIFT-JIS file

iconv -f UTF-8 -t SHIFT-JIS utf-8-file > shift-jis-file
file -i shift-jis-file

shift-jis-file: text/plain; charset=unknown-8bit

touch sample echo "Привет" > sample file -i sample

sample: text/plain; charset=utf-8

iconv -f UTF-8 -t Windows-1251 sample > windows-1251-file
file -i windows-1251-file

windows-1251-file: text/plain; charset=iso-8859-1

As an option you can use convmv

If you have problems with encoding on a site I advise you to read the article «Site in the wrong encoding»

Change the file owner

Suppose you have a file one whose owners are the user user and the group group

-rwx------. 1 user group 21012480 Dec 1 16:49 one

To change the owners to andrei and heihei run

chown andrei:heihei one

-rwx------. 1 andrei heihei 21012480 Dec 1 16:49 one

The sections about searching and comparing files are now in separate articles.

Trim mp3

ffmpeg -i original.mp3 -vn -acodec copy -ss 00:00:00 -to 00:30:00 part_01.mp3

Article author: Andrei Olegovich