hostname in Ubuntu
Introduction
A hostname is a unique label that identifies a machine on the network.
There must be a correspondence table between the hostname and
IP address
this is needed for packet routing.
A host can have several names, but the preferred option is a single name.
There are three classes of hostname: static, pretty and transient.
- static — the traditional hostname, which can be set by the user and is stored in /etc/hostname
- pretty — a free-form UTF8 hostname used for presentation to the user. For example HeiHei' host.
- transient — a dynamic hostname maintained by the kernel, which can be changed by a DHCP or mDNS server at runtime. By default it is the same as the static hostname.
It is recommended to use a fully qualified domain name ( FQDN ) for both static and transient names, such as host.example.com .
Since RHEL 7 supports only Fully Qualified Domain Names (FQDNs),
I advise you to carefully check the hostname you plan to use.
Since Ubuntu 7 supports only Fully Qualified Domain Names (FQDNs),
I advise you to carefully check the hostname you plan to use.
- Lowercase letters from a to z
- Digits from 0 to 9
- Dots and hyphens
- A hostname can be from 2 to 63 characters long
- A hostname must start and end with a digit or a letter
Find out your hostname
There are several ways to find out your hostname.
Often it is enough just to look at the terminal
An example of my terminal
[andrei@localhost Downloads]$
andrei is the user name
localhost is the hostname
Downloads is the name of the current directory
You can see the order by running
echo $PS1
[\u@\h \W]\$
u - user
h - host
W - Working Directory
Other ways
hostname
localhost.localdomain
hostname -f
localhost
uname -n
localhost.localdomain
hostnamectl
Static hostname: localhost.localdomain Icon name: computer-vm Chassis: vm Machine ID: 35e254eda578c54084b96e06d5f285cf Boot ID: afb44fef8d764f30bb89550849b02fde Virtualization: kvm Operating System: Ubuntu Linux 7 (Core) CPE OS Name: cpe:/o:ubuntu:ubuntu:7 Kernel: Linux 3.10.0-1160.36.2.el7.x86_64
Change the hostname
Using the hostname command
hostname dns-server
hostname
dns-server
If you open the terminal again, the changes will be visible in the command line.
[andrei@dns-server~]$
This hostname will persist only until the system is rebooted
If you run hostnamectl you can see that what changed was only the dynamic name of the host
hostnamectl
Static hostname: localhost.localdomain Transient hostname: dns-server Icon name: computer-vm Chassis: vm Machine ID: cff8a80b9c356243b5238452511a8ade Boot ID: 64d9ddab85ec4c219ac46c6a2940e628 Virtualization: kvm Operating System: Ubuntu Linux 7 (Core) CPE OS Name: cpe:/o:ubuntu:ubuntu:7 Kernel: Linux 3.10.0-1160.42.2.el7.x86_64 Architecture: x86-64
If you examine the file hostname , you can also see that there are no changes.
cat /etc/hostname
localhost.localdomain
Using hostnamectl
hostnamectl set-hostname dns-server.andrei.com
hostname
dns-server.andrei.com
This is a permanent change. That is, the new hostname has the persistent class.
cat /etc/hostname
dns-server.andrei.com
pretty name
To set a pretty name you need to use quotes
hostnamectl set-hostname "andrei's.host.com"
hostnamectl
Static hostname: andreis.host.com Pretty hostname: andrei's.host.com Icon name: computer-vm Chassis: vm Machine ID: cff8a80b9c356243b5238452511a8ade Boot ID: 64d9ddab85ec4c219ac46c6a2940e628 Virtualization: kvm Operating System: Ubuntu Linux 7 (Core) CPE OS Name: cpe:/o:ubuntu:ubuntu:7 Kernel: Linux 3.10.0-1160.42.2.el7.x86_64 Architecture: x86-64
A pretty hostname appeared, while the static hostname is the same , but without the forbidden characters
The file /etc/hostname shows only the static hostname
cat /etc/hostname
andreis.host.com
the pretty hostname can be seen in the file /etc/machine-info
cat /etc/machine-info
PRETTY_HOSTNAME="andrei's.host.com"
hosts
You can examine information about the names of other hosts in the file hosts
In my example there are two hosts on the network:
dns-server.andrei.com
with the IP address
192.168.56.149
host113.andrei.com with the IP address
192.168.56.113
Let us log in to it using ssh and see whether it has records about the names of other hosts on the network.
For clarity, I will now show the terminal prompt so that the hostname is visible.
[andrei@dns-server~]$ ssh andrei@192.168.56.113
Let us run ping by IP
[andrei@host113 ~]$ ping 192.168.56.149
PING 192.168.56.149 (192.168.56.149) 56(84) bytes of data. 64 bytes from 192.168.56.149: icmp_seq=1 ttl=64 time=0.650 ms 64 bytes from 192.168.56.149: icmp_seq=2 ttl=64 time=0.731 ms ^C --- 192.168.56.149 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1000ms rtt min/avg/max/mdev = 0.650/0.690/0.731/0.048 ms
Ping by IP succeeds
And ping by hostname
[andrei@host113 ~]$ ping dns-server.andrei.com
ping: dns-server.andrei.com: Name or service not known
host113 does not know how to resolve the name
dns-server.andrei.com
This is not surprising - after all, in the file
hosts
there are no records about it. Let us check the contents:
[andrei@host113 ~]$ cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
Let us add a record for dns-server.andrei.com
sudo vi !$
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.56.149 dns-server.andrei.com
Let us repeat ping
[andrei@host113 ~]$ ping dns-server.andrei.com
PING dns-server.andrei.com (192.168.56.149) 56(84) bytes of data. 64 bytes from dns-server.andrei.com (192.168.56.149): icmp_seq=1 ttl=64 time=0.698 ms 64 bytes from dns-server.andrei.com (192.168.56.149): icmp_seq=2 ttl=64 time=0.735 ms 64 bytes from dns-server.andrei.com (192.168.56.149): icmp_seq=3 ttl=64 time=0.739 ms ^C --- dns-server.andrei.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2001ms rtt min/avg/max/mdev = 0.698/0.724/0.739/0.018 ms
Now everything works
alias
To avoid writing long hostnames you can invent an alias
The format is as follows
IP FQDN ALIAS
FQDN - Fully Qualified Domain Name - the fully qualified name of a domain.
192.168.56.149 dns-server.andrei.com vbdns
[andrei@host113 ~]$ ping vbdns
PING dns-server.andrei.com (192.168.56.149) 56(84) bytes of data. 64 bytes from dns-server.andrei.com (192.168.56.149): icmp_seq=1 ttl=64 time=0.619 ms 64 bytes from dns-server.andrei.com (192.168.56.149): icmp_seq=2 ttl=64 time=0.674 ms ^C --- dns-server.andrei.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1000ms rtt min/avg/max/mdev = 0.619/0.646/0.674/0.037 ms
Note the dns-server.andrei.com
Although the ping was by alias, the reply comes as from the static fqdn
If you change the order so that vbdns comes first and the FQDN dns-server.andrei.com second, then dns-server.andrei.com will be considered an alias
192.168.56.149 vbdns dns-server.andrei.com
In that case the reply will come from vbdns
[andrei@host113 ~]$ ping vbdns
Or
[andrei@host113 ~]$ ping dns-server.andrei.com
PING vbdns (192.168.56.149) 56(84) bytes of data. 64 bytes from vbdns (192.168.56.149): icmp_seq=1 ttl=64 time=0.721 ms 64 bytes from vbdns (192.168.56.149): icmp_seq=2 ttl=64 time=1.01 ms ^C --- vbdns ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1004ms rtt min/avg/max/mdev = 0.721/0.866/1.012/0.148 ms
This can become important when working with certificates
On the hosting
How to add a match between a site's IP address and its domain
Article author: Andrei Olegovich